We recommend the following dimmers:

Universal Dimmers
Clipsal 32E450UDM Universal Dimmer
Clipsal 31E2PUDM Push Button Universal Dimmer
Clipsal 31E2RUDM Rotary Controlled Universal Dimmer

LED Dimmers
LoadSmart Generation 2 ­ Lumex ­ LED Modular Rotary Dimmer 
LYNX­LED Dimmer ­ CLA ­ LED Trailing Edge Rotary dimmer 
LEDSMART XPERT­ diginet/Gerard Lighting ­ rotary dimmer

Trailing Edge Dimmers
Clipsal 32E45OTM – Trailing Edge

Our bulbs are dimmable with HPM push button and Trailing Edge and CBUS dimmers in most circumstances but we recommend the new Universal or LED specific dimmers. With older Dimmers and CBUS dimmers there may be issues with minimum load requirements so if there is 30W or more of lighting on the circuit the dimmer will work but with lower amounts, this will not necessarily be the case. When installing please note that flickering and flat spots at either end of the dimming spectrum may occur ­ we recommend using a dimmer where a set point can be altered to ensure that these issues can be minimised at installation. 

Subscribe